Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Reputation Breakdown
No reputation gained yet.
1342
I would also like to say thank you for this guide. I wouldn’t have been able to build mine without the guide either.
Cheers!
I guess you’ve already worked it out by now but i had the same question for my build. Did some measurements and studied these pictures of where to bend the mosfet-feet.
My measurements came out like this:
If 0;0mm (x;y) is center of heatsink and also center hole of PCB. Then the other holes turned out like this.
0 ; 0 (Center PCB)
-60;0 (For mosfet)
60; 0 (For mosfet)
-40; -20 (Optional)
-40; 20 (Optional)
40; -20 (Optional)
40; 20 (Optional)
Illustration:
-40;20 40;20
-60;0 0;0 60;0
-40;-20 40;-20
Drill with 2,5mm and tap for M3-thread.
My PCBs is rev 1.6, purchased in July 2023.
I hope this will help others.
/John