Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Reputation Breakdown
No reputation gained yet.
1226
Here is a good spot to point out that you will also need to use a small section the brown/white pair of wire for the connection from the input switch to the potentiometer a bit later on.
Cut off about 4” to 5” (100-120mm) of wire now for this later use. The remaining longer brown/white section of wire can then be in half (about 8” to 9” each or 200-220mm) to be used for the power connections. So you should start off with two 8 to 9” (200-220mm) lengths and one 4 to 5” (100-120mm) piece.
I missed this part and simply cut the whole length in half at first, then didn’t have enough left over to make the switch-to-pot connection later on and ended up having to use different wire. Not a big deal, but it is nice to keep the color codes the same as in the guide to aid in troubleshooting later on if the need arises.