Note: if you plan to pre-assemble your filter board to the chassis bottom plate, notice that the bottom and top vented panels are directional. The front end aligns flush to the heat sink, while the rear end sticks out 3mm past the heat sink, in order to align flush to the rear panel. See photo in step 18.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Note: if you plan to pre-assemble your filter board to the chassis bottom plate, notice that the bottom and top vented panels are directional. The front end aligns flush to the heat sink, while the rear end sticks out 3mm past the heat sink, in order to align flush to the rear panel. See photo in step 18.