This is the first Kit I have done and I believe it to be very approachable; I got two to use as Mono Blocks. My only trick that I found worked well for me on the second go-round was to have the bottom and the top panels off and stand the chassis on its face (I gave the switch space with a roll of masking tape) when soldering all the internal wires to the boards. This especially allows much better access to the LED and Power/Ground points on the “bottom” of the PCB , instead of reaching in solely from the top panel access. Similar setup to the video on the v1.6 when tuning the trim pots. Otherwise, very clear and concise instructions and the system sounds fantastic. 10 out of 10 would recommend to a friend.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.